Awards and Achievements

NIL

Research Projects /patents/Memberships:

Board of College and University Development (BCUD), University of Pune granted Rs. 2,00,000/- for research project title “Optimization of weld bead geometry and process parameters of GMAW welding process for various grades of steels using Advanced Optimization Techniques” in the year 2010-11 and completed in the year 2012-13.

PATENTS

Published patent titled “Smart Traffic Management System and Method for Emergency Vehicles” on dated 24/04/2020 (File No. 202021034999).

MEMBERSHIPS

• SAE membership

RESEARCH PROJECTS

: Board of College and University Development (BCUD), University of Pune granted Rs. 2,00,000/- for research project title “Optimization of weld bead geometry and process parameters of GMAW welding process for various grades of steels using Advanced Optimization Techniques” in the year 2010-11 and completed in the year 2012-13.

INTERNATIONAL JOURNALS

• Kamble A. G., Rao R V., Potdar A S., Lokhande A D., “Prediction and optimization of spur gear by response surface method”, Journal of Advances in Engineering Science, 2010, pp. 23-28.
• Kamble A. G., Rao R V., Kale A V., Gupta S., “Optimization of engine performance with different blends of ethanol with petrol”, International Journal of Applied Engineering, 2011, pp. 41-50.
• Kamble A. G., Rao R V., Kale A V., Gupta S., “Selection of welding mechanism for ship building industry”, International Journal of Applied Engineering, 2011, pp. 76-84.
• Kamble A. G., Rao R V., Kale A V., “Development of mathematical models for prediction of weld bead geometry for AISI 430 grade of steel for GMAW welding process”, International Journal of Manufacturing Technology and Industrial Engineering, 2011, pp. 1-6.
• Kamble A. G, Rao R V., Kale A.V., Samant S.P., “Selection of cricket players using AHP”, International Journal of Sport & Sport Engineering, 2011, pp. 207-212.
• Kamble A. G., Gupta S., Trivedi B., Jangale P., “Optimization of welding mechanisms using analytical hierarchy process, technique for order preference by similarity to ideal solution and graph theory and matrix approach”, International Journal of Manufacturing Technology and Management, 2012, pp. 39-55. (Inderscience)
• Kamble A. G., Rao R. V., “Experimental investigation on the effects of process parameters of GMAW and transient thermal analysis of AISI 321 steel”, Advances in Manufacturing, 2013, pp. 362-377. (Springer)
• Jawale P. P., Kamble A. G., “Effect of MIG welding process parameters on weld geometry”, International Journal of Latest Technology in Engineering, Management & Applied Science, 2014, pp. 161-166.
• Sayare R. S., Kamble A. G., “Parameter optimization of composite leaf spring using TLBO algorithm”, International Engineering Research Journal, 2015, pp. 5760-5765.
• Kamble A.G., Rao R. V., “Effects of process parameters and thermo-mechanical simulation of gas metal arc welding process”, International Journal of Modelling and Simulation, 2016, pp. 1-13. (Taylor and Francis)
• Cheke K. D., Bhalerao K. B., Chaudhari R. P., Chaudhari S. V., Kamble A. G., “Application of multi attributes decision making methods for selection of blends of ethanol with petrol for SI engine”, International Journal for Science and Advance Research in Technology, 2016, pp. 269-275.
• Abhinaw Kumar, Ugale S. N., Solanki A., Mohit Kumar, Kamble A. G., “Optimization of bead geometry parameters of electron beam welding using advanced optimization techniques”, International Journal for Science & Advance Research in Technology, 2016, pp. 180-187.
• Kamble A.G., Rao R. V., “Effects of process parameters and thermo-mechanical simulation of GMAW process for welding of 3Cr12 steel”, Advances in Materials and Processing Technologies, 2016, pp. 1-24. (Taylor and Francis)
• Kamble A. G., R. V. Rao., “Prediction of effects of process parameters and thermo- mechanical simulation of GMAW process for welding of AISI 430 steel”, International Journal of Manufacturing Technology and Management,2016, pp. 13-26 (Inderscience)
• Kamble A. G., R. V. Rao., “Effects of process parameters of GMAW on bead geometry, tensile strength, hardness, microstructure and thermo-mechanical simulation of AISI 202 steel”, Indian Journal of Engineering and Material Sciences, 2017, p.p. 413-428. (SCI).
• Dhainje U. C; Kamble A.G; “Design analysis and performance evaluation of heat pipe embedded oil cooler with enhanced staggered fins”, International Journal of Recent Technology and Engineering, 8(3), 2019, pp. 5598-5603.
• Cheke K. D., Kamble A. G., “Design of multi-stage axial flow compressor and validation using numerical simulations, International Journal of Innovative Technology and Exploring Engineering, 9(2), 2019, pp. 2320-2325.
• Priyanka Wakchaure, Pooja Gade, Manish Pandey, Avinash Kamble, “Prediction and optimization of process parameters of CNC machine on carbide inserts” REST Journal on Emerging trends in Modelling and Manufacturing, 6(1), 2020, pp. 1-6.
• Kamble A.G., Rao R. V. “Investigation on effects of parameters of GMAW process on bead geometry, hardness and microstructure of AISI 410 steel weldments” Journal: Advances in Materials and Processing Technologies,2021, pp. 1-15.(Taylor and Francis)
• Akash Salunke, Ajit Lokhande, Akash Neherkar, Rupesh Satpute, Avinash Kamble, “Selection of engine oil using multi-attribute decision making methods” International Journal of Industrial and system Engineering, 2021. (Inderscience)
• Rajurkar K. S., Khade S. P, Sawant O. P., Dobe M. P., Kamble A. G. “Selection of Fighter Aircraft by using Multi Criteria Decision Making Methods” International Journal of Process Management and Benchmarking, 2022. (Inderscience)
• Fulzele S. B., Khatke S. B., Kadam S. J., Kamble A. G., “Application of Multi-Attribute Decision-Making Methods for Selection of Conveyor”, Soft Computing, 2022. (Springer)
• Kamble A. G., Kalos P. S. , Mahapatra K., Bhosale V. A., “Selection of raw material supplier for cold-rolled mild steel manufacturing industry”, International Journal of Simulation Multidiscipline Design. Optimization Vol, No (2022) (Scopus)

INTERNATIONAL CONFERENCE

• Kamble A. G., Thakur Vikas, Ankit Munshi “Flow measurement by Magnetic Flowmeter”, 2nd International Conference on Recent Advanced in Experimental Fluid Mechanics at K L College of Engineering, Vijayawada, Andhra Pradesh, India during 3- 6 March, 2008.
• Kamble A.G, Love Karya, “Computation of SHP potential at reservoir outlet and at the drop of canal of irrigation project and typical overall turbine design”, International Conference on Advances in Mechanical Engineering at Sardar Vallabhbhai National Institute of Technology, Surat, Gujrat, India during 15-17 Dec, 2008.
• Kamble A. G., Rao R V, Siddhartha Gupta, “Optimization of weld bead geometry and parameters of different welding processes using various computational methods - A Review”, International Conference on Advances in Mechanical Engineering, Sardar Vallabhbhai National Institute of Technology, Surat, Gujrat, during 3-5 Aug, 2009.
• Kamble A.G., Gupta S., Sonawane K., “Optimization of welding mechanisms using analytical hierarchy process and technique for order preference by similarity to idea solution method”, International Conference on Computation Methods in Engineering and Science, Hyderabad, 2009.
• Kamble A.G, Rao R. V., Kale A.V., “Development of mathematical models for prediction of weld bead geometry for AISI 430 grade of steel for GMAW welding process”, International Conference on Advances in Mechanical Engineering at Sardar Vallabhbhai National Institute of Technology, Surat, Gujrat, India during 6-8, Aug, 2011.
• Patrike N. P., Patro S., Kamble A.G., “Design and fabrication of micro-hydro turbine for water treatment plant” International Conference on Mechanical and Aerospace Engineering at Indraprasta Institute, New Delhi, India, 2011.
• Pawar D. L., Gorabe D. B., Kamble A. G., Adhav R. S., “Selection of industrial robotics using evaluation of mixed data method”, International Conference on Science and Technology (ICST), S. B. Patil College of Engineering, Indapur, Pune, India, 2014.
• Chaudhari P. S., Kamble A. G., “Optimization of process parameters of GMAW process using TLBO technique” International Conference on Advances in Engineering and Technology at Smt. Kashibai Navale College of Engineering, Pune during 1-3rd September, 2014.
• Sayare R. S., Kamble A. G., “Parameter optimization of composite leaf spring using artificial bee colony algorithm”, International Conference on Trends in Industrial and Mechanical Engineering at Maulana Azad National Institute of Technology, Bhopal, Madhya Pradesh, India during 4-6 Feb. 2016.
• Shaikh H. B., Kamble A. G., “Optimization of drilling process parameters using advanced optimization algorithm” International Conference on Industrial Engineering at Sardar Vallabhbhai National Institute of Technology, Surat, Gujrat, India during 21-23, December, 2017.
• Pise G. V., Kamble A.G, Chougule M. N., “ Simulation and optimization of spur gear parameters using taguchi method”, International Conference on Industrial Engineering at Sardar Vallabhbhai National Institute of Technology, Surat, Gujrat, India during 21-23, December, 2017.
• Shaikh H. B., Kamble A. G., “Optimization of dynamic load carrying capacity of deep groove ball bearing using Jaya algorithm” International Conference on Advances in thermal systems, materials and design engineering at Veer Jijamata Institute of Technology, Mumbai during 21-22 December, 2017.
• Bhosale V. A., Kamble A. G., “ Evaluation of the penetration of knowledge flow in supply chain for Indian manufacturing organization”, 5th International Conference on Industrial Engineering at Sardar Vallabhbhai National Institute of Technology, Surat, Gujrat, India during 12-14, December, 2019.
• Avinash Kamble, Vishal Bhosale, Vishal Naranje, “Selection of Blends of Ethanol with Petrol for SI Engine Using TOPSIS and VIKOR methods”, The 2nd International Conference on Future Learning Aspects of Mechanical Engineering, Department of Mechanical Engineering, Amity School of Engineering and Technology, Amity, 05-07th August, 2020.
• Vishal Naranje, Mohammad Nadeem Khalid, Avinash Kamble, Mohammad Arif “Parameters Optimization of Gas Tungsten Arc Welding Using AHP based Taguchi Method ”, The 2nd International Conference on Future Learning Aspects of Mechanical Engineering, Department of Mechanical Engineering, Amity School of Engineering and Technology, Amity, 05-07th August, 2020.
• Ajit Lokhande, Akash Neharkar, Akash Salunkhe, Rupesh Satpute, Avinash Kamble, “GSM based Operation System for Agricultural Pumps”, The 2nd International Conference on Future Learning Aspects of Mechanical Engineering, Department of Mechanical Engineering, Amity School of Engineering and Technology, Amity, 05-07th August, 2020.
• Aniket Pendse Avinash Kamble, “Optimization of Design Problems Using TLBO and mTLBO Algorithms”, The 2nd International Conference on Future Learning Aspects of Mechanical Engineering, Department of Mechanical Engineering, Amity School of Engineering and Technology, Amity, 05-07th August, 2020.
• Aniket Pendse Avinash Kamble, “Comparative study of optimization of plate fin heat exchanger and pressure vessel design using mTLBO algorithm”, International Conference on Integrated Interdisciplinary Innovations in Engineering, University Institute of Engineering and Technology, Panjab University, Chandigarh and Government College of Engineering and Technology, Jammu, 28-30th August, 2020.
• Atul Suryawanshi, Avinash Kamble, Sandip Kore, “Experimental Investigation of inclined circular ring turbulators on heat transfer and fluid flow characteristic” 3rd International conference on Advances in Mechanical Engineering, Dept. of Mechanical Engineering, Vardhaman College of Engineering, Hyderabad, 27th -28th August, 2020.
• Sagar Y. Borole, Pratik U. Malu, Avinash G. Kamble “Selection of passenger car using TOPSIS method” 2nd International Conference on Recent Advances in Manufacturing, Department of Mechanical Engineering, S. V. National Institute of Technology, Surat, Gujarat, India during 10-12 June, 2021.
• Pratik U. Malu, Sagar Y. Borole, Avinash G. Kamble “Selection of two-wheeler scooter using Analytical Hierarchy Process” 2nd International Conference on Recent Advances in Manufacturing, Department of Mechanical Engineering, S. V. National Institute of Technology, Surat, Gujarat, India during 10-12 June, 2021.
• Sagar Y. Borole, Pratik U. Malu, Avinash G. Kamble “Selection of Industrial robot for manufacturing industry using COPRAS method” 2nd International Conference on Recent Advances in Manufacturing, Department of Mechanical Engineering, S. V. National Institute of Technology, Surat, Gujarat, India during 10-12 June, 2021.
• Kamble A. G., Chandore A. S., “Selection of Raw Material Suppliers For Cold-Rolled Mild Steel Manufacturing Industry”, Advanced Engineering Optimization Through Intelligent Techniques (AEOTIT)” S. V. National Institute of Technology, Surat, Gujarat, India during 28-30th January, 2022.

NATIONAL CONFERENCE

• Kamble A. G., Patil S. V., “Experimental verification of characteristics of bends used as flowmeter”, National Conference on Advances in Fluid Flow and Thermal Sciences at Sardar Vallabhbhai National Institute of Technology, Surat, during 22-24, May, 2008.
• Chougule M. N., Kamble A. G., “Analysis of thermally induced residual stresses for stainless steel grade using GMAW process”, 3rd National Conference on Innovations in Mechanical Engineering at Sinhgad Institute of Technology, Lonavala, Tal: Maval, Dist: Pune, Maharashtra during 09-10th Jan. 2015.
• Kamble A. G., Hiwarkhede T. K., Jagtap V. N., Narkhede P. S., Godase P. B., “Study of thermally induced residual stresses for stainless steel grade using GMAW process”, 3rd National Conference on Innovations in Mechanical Engineering at Sinhgad Institute of Technology, Lonavala, Tal: Maval, Dist: Pune, Maharashtra during 09-10th Jan. 2015.
• Kamble A. G., Suryawanshi S. P., Gawade S. R., Choramale M. A., Joshi A. G., “Selection of material for manufacturing gas cylinder using ORESTE method”, 3rd National Conference on Innovations in Mechanical Engineering at Sinhgad Institute of Technology, Lonavala, Tal: Maval, Dist: Pune, Maharashtra during 09-10th Jan. 2015.
• Kamble A. G., Sayyad I. M., Shaikh A. R., Shaikh A. A., Botwe R. G., “ Power generation system at speed breaker” 2nd Under Graduate National Conference on Innovations in Mechanical Engineering at Sinhgad Institute of Technology, Lonavala, Tal: Maval, Dist: Pune, Maharashtra during 24th March, 2017.
• Kamble A. G., Tiwari G., Agrawal G., Hiray G., “ Optimization of GTAW process parameters using advanced optimization algorithms” 2nd Under graduate National Conference on Innovations in Mechanical Engineering at Sinhgad Institute of Technology, Lonavala, Tal: Maval, Dist: Pune, Maharashtra during 24th March, 2017.
• Kamble A. G., Shewale H. B., Sisodiya P. R., Shinde P. K., Savant A. S., “ Tidal power linear generator” 2nd Under graduate National Conference on Innovations in Mechanical Engineering at Sinhgad Institute of Technology, Lonavala, Tal: Maval, Dist: Pune, Maharashtra during 24th March, 2017.

RESEARCH PROJECT COMPLETED

Board of College and University Development (BCUD), University of Pune granted Rs. 2,00,000/- for research project title “Optimization of weld bead geometry and process parameters of GMAW welding process for various grades of steels using Advanced Optimization Techniques” in the year 2010-11 and completed in the year 2012-13.

PATENT DETAILS

K. S. Rajurkar, O. M. Sawant, S. P. Khade, M. P. Dobe, A. G. Kamble published patent titled “Smart Traffic Management System and Method for Emergency Vehicles” on dated 24/04/2020 (File No. 202021034999).